High Precision Technologies

Ceramic Servo Motor
Nanomotion's HR Series motors range in a size from a single element (providing 4N of force) to an eight element motor (providing 32N of force). The HR Series is capable of driving both linear and rotary stages. The HR Series motors have a wide dynamic range of speed, from several microns per second to 250mm/sec and can easily mount to traditional low friction stages or other devices. The unique operating characteristics of the HR Series motors provide inherent braking and the ability to eliminate servo dither when in a static position.

 

Porous Carbon Air Bearings
Unlike the orifices used in conventional air bearings, New Way Porous Media Air Bearings control the airflow across the entire bearing surface through millions of holes in the porous material. Because of this they will still fly even after being severely scratched and have superior performance due to more consistent air pressure distribution. New Way air stages combine an accurate guide with an air stage in one component. This provides the user with the convenience of integrated guide and bearing systems. These stages have a straightness of smoothness of motion often an order or magnitude better than conventional rolling element bearings.

 

Miniature Linear Motor
The TT Micro meets the industry challenge for miniaturization, simplicity of installation and performance in linear motion. Linear motor cost is redefined with advanced polymers and manufacturing methods. The ruggedness of the Micro's tubular design sets a new standard for cost of ownership.

The TT Micro design enables the load to be mounted directly on the forcer without heatsinking. With a moving mass of just 70 grams, the forcer makes optimal use of available thrust to accelerate the load. A large air gap and bearing mounting surface makes mechanical integration easy.

 

Ultra-High Resolution Positioner
The MK Series is a family of linear stages that utilize Nanomotion’s patented ceramic servo motors to provide exceptional performance in a very small form factor. Leveraging the advantage of the highest force per motor size, the MK Series focuses on assemblies that are smaller than typical commercial stages and optimize the performance of the ceramic servo motor. As the motor is often the ‘enabling technology’ to achieve the desired motion control performance, Nanomotion is in an optimal position, as the motor manufacturer, to provide the complete solution and assure performance specifications.

Office Locations