Integrated Motor Technology

There is an increasing trend in automated machine design to integrate each motion control component (controls + amplifier + motor) into a single package. This integrated approach greatly reduces system wiring, panel space, and most importantly costs. Give us a call to see how easy it is to implement these integrated motor technologies into your next design.

Call to speak with a motor specialist at: (800) 236-0607

		Servo Motor + Drive + Controller The SM Series from Animatics Smart Motor is a revolutionary design that integrates a complete servo motion control system into a single component. The system includes a brushless servo motor, brushless servo drive, and motion controller with software communications and I/O packaged into a standard NEMA frame size servo motor body. This motor is available is NEMA17, 23, 34 and 42.
		ServoStep Motor + Drive + Controller The ServoStep motor from Animatics is a traditional 50 pole step motor controlled as a servo motor. Here you get the benefit of the low-cost, high torque per package size of the stepper with the higher end speed of a servo. This system literally offers the best of both worlds (servo & stepper) in one integrated package. This technology is available in NEMA23 and 34.
		Stepper Motor + Drive + Controller The MDrive from IMS is high torque integrated step motor, driver, and controller into a single package. The low cost MDrive allows the system designer to decide the best method of control. The MDrive's integrated electronics eliminates the need to run the motor cabling through the machine, reducing the potential for problems due to electrical noise. These motors are available in NEMA14, 17, 23, 34 and 42.
		Stepper Motor + Drive The SilverPack from Lin Engineering combines a high-performance stepper motor with a microstepping drive in a single package. The integrated design is ideal for space-constrained applications since it eliminates the panel space typically required to mount a stepper drive. This is the perfect solution when you want to coordinate several axes together with a multi-axis controller but want to reduce your system wiring. These motors are available in NEMA17 and NEMA23.
		Stepper Motor + Drive + Linear Actuator The MDrive from IMS is also available with an integrated leadscrew. This product design makes for a very cost competitive, high performance “mini-actuator”. The smallest NEMA14 product is capable of developing 50 lbs force and the largest NEMA34 is capable of 500 lbs force. This design has also been successfully implemented into high-speed “stationary screw” applications; in this design configuration the motor moves linearly along the length of the screw. The key advantages are low inertia, high speed, and high force. This motors are available in NEMA14, 17, 23 and 34.
		Industrial Bar Code Systems: The MS-860 makes reading bar codes and stacked 2D codes easy. Push-button calibration and a fully programmable feature set enable you to quickly and easily configure the scanner to meet your needs. Raster settings are programmable to read multiple symbols at different locations or at varying distances.

Call to speak with a motor specialist at: (800) 236-0607

Contact us today:
Portland, Seattle, Tacoma, Spokane, Boise
P: (800) 236-0607
F: (503) 582-9477
Email: info@olympus-controls.com

Office Locations

Olympus Controls is a
Microscan Preferred Partner

This email was sent to: [!--$email_addr$--]
To remove yourself from our list, click here